Introduction to Outdoor Tent Manufacturers and Relevant Knowledge on Choosing Outdoor Tents

The selection of outdoor tents has always been a problem that troubles entry-level hikers and travel enthusiasts. Seeing the various outdoor tents in the park, in fact, none of them can be used in nature camping. Today, the outdoor tent manufacturer's editor will introduce the relevant knowledge of choosing outdoor tents in a simple and understandable way.

Key indicators: The technical indicators of waterproof fabric are based on the degree of waterproofing.

1. Anti splashing only applies AC or PU on the surface, usually only for gaming accounts;

2. Waterproof 300mm is generally used for beach tents/sunshades or cotton tents used in drought and low rain conditions;

3. Waterproof 800MM-1200mm is used for conventional simple camping outdoor tents;

4. Waterproof 1500MM-2000MM is suitable for mid-range outdoor tents that require multiple days of travel;

5. Waterproof over 3000mm is generally a professional outdoor tent that has been treated with high temperature/cold resistance technologies.

Supporting skeleton

1. Steel pipe: also known as high-frequency welded pipe, mainly used on large outdoor tents such as military outdoor tents and disaster relief outdoor tents. The surface is sprayed or galvanized, and there are round pipes and square pipes. The pipe diameter generally ranges from 19 to 50mm, and the wall thickness ranges from 0.8 to 3mm.

2. Elastic stiffness: This type is usually a children's tent or a beach game tent.

3. Fiberglass rods: available in a series of 6.9/7.9/8.5/9.5/11/12.5. The thicker, the stronger the rigidity, and the weaker the softness. So whether the selection of fiber tube support is reasonable is determined by the ratio of its ground size and height, as being too thick or too thin can easily lead to breakage. For example, 210 * 210 * 130 is a classic size with a ratio of 7.9 or 8.5 for pipes.

4. Aluminum alloy skeleton: It is relatively high-end and difficult to inspect according to the alloy ratio. Generally, the overall curvature curve of its original bracket is calculated first and then hot pressed and shaped. The characteristic is light and easy to carry, mainly because it is not easy to fold, but the quality is not good and it is prone to bending and deformation.


5. Carbon pole: relatively high-end, with the advantage of being very light, greatly reducing the weight of outdoor tents, but the disadvantage is that it is more prone to breakage compared to aluminum alloy frames.